Nevşehir Hacı Bektaş Veli University Course Catalogue

Information Of Programmes

FACULTY OF ENGINEERING & ARCHITECTURE / DEPARTMENT OF MECHANICAL ENGINEERING

History

The opening of the Department of Mechanical Engineering within the Faculty of Engineering and Architecture has been approved based on the meeting of Higher Education Board held on 14.04.2010.


Qualification Awarded

Students who have accomplished in all the courses (equal to 240 ECTS) and achieved to least 2.0 from 4.00 their average are awarded a bachelor’s degree diploma in Mechanical Engineering.

Level of Qualification

Bachelor's Degree

Specific Admission Requirements

In our country, access to the undergraduate programs of universities depends only on the scores obtained from the YKS (Higher Education Institutions Examination) and the AYT (Field Qualification) examinations. Candidates, according to the scores of the scores they want to enter according to the preferences of the departments, the preference form, Student Selection and Placement Center (OSYM) will send. ÖSYM takes all applications, groups the applications by score type, sorts the scores from the highest to the lowest, lists all the available programs according to the preferred score type and places the students in one of their preferred programs. The choice of foreign students who will enter the universities in our country is done by the central examination called Foreign Student Examination (YÖS). According to the results of this examination, foreign students are accepted within a certain quota. Documents required for registration; high school and equivalent school diploma and ÖSYM the placement examination results document.

Specific Arrangement For Recognition of Prior Learning

Recognition of prior learning in Turkish higher education institutions are still in progress. Therefore, recognition of prior learning in Nevşehir Hacı Bektas Veli University has not been fully accomplished. However, exemption exams from such lessons as Computer Sciences and English are held at the beginning of every academic year. Students who consider themselves capable of meeting the learning outcomes of such lessons are welcome to take the exemption test. Those who have passed the exemption test are exempt from the relevant lesson.

Qualification Requirements and Regulations

Students are must be successfully complete all of compulsory and elective their lessons in the program and to have a average degree at least 2.0 from 4.00 in order to get bachelor's degree in Machine Engineering.

Profile of The Programme

Our program consist of expert academics in the field, the necessary studies are carried out along with the courses. The aim of our department is to nurture Metallurgical and Materials Engineers with equipped the ability of problem-solving, undertake high responsibility, national, moral and ethical values, contemporary.

Key Learning Outcomes of the Programme

PO-1 Student, mathematics, physics, chemistry and basic engineering knowledge, has the sufficient information for use in the field of Mechanical Engineering.
PO-2 Student analyzes system and system components or processes and gains the ability to apply modern design methods in this direction.
PO-3 Student determines the engineering problems, identifies, formulates and solves, this purpose, the ability to select and apply appropriate analytical methods and modeling techniques
PO-4 Then, both nationally and in individual and multi-disciplinary teams, effective skills, responsibility and teamwork, self-confidence makes.
PO-5 Student is aware of the necessity of lifelong learning, followed by developments in science and technology, and also constantly renews itself.
PO-6 Then, in the field of Machnical engineering uses existing methods and devices according to the standards, test design, test makes, collects data, analyzes and reviews the results.
PO-7 Student, mathematics, physics, chemistry and theoretical and practical knowledge in the field of Machnical Engineering is able to use for engineering solutions.
PO-8 Student communicates effectively and gains life-long learning skills, with a sense of professional and ethical responsibility.
PO-9 Student understands the effects of global and societal context of engineering solutions and applications, and has knowledge of contemporary issues.
PO-10 Student knows project management, workplace practices, employee health, environmental and safety issues; is aware of the responsibility of the legal and engineering applications.
PO-11 Develops his/her skills in art and sports.

NQF-HETR Program Outcomes Matrices

Our graduates are aiming to; working in units requiring mechanical engineering education in national or international institutions and organizations,, developing projects that will solve problems by detecting problems, taking office in research-development (R&D) and product development (P&D) projects in the industry, establish new business fields with entrepreneurial approach and make contributions to the development of the industry by working in priority areas, to conduct scientific research in national and international research institutions,

Access to Further Studies

The students who have successfully completed their undergraduate studies, can attend to postgraduate programs provided that they have acceptable score from ALES(Academic Personnel and Postgraduate Education Entrance Exam) and have sufficient English language skills.

Course Structure Diagram with Credits

1. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
AIT101 ATATURK’S PRINCIPLES AND HISTORY 2 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 2
MM107 COMPUTER AIDED TECHNICAL DRAWING-I 2 Hour(s) 2 Hour(s) 1 Fall Semester Compulsory 4
MM103 PHYSICS-I 3 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 4
MM105 GENERAL CHEMISTRY 3 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 4
MM101 CALCULUS-I 3 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 5
MM109 LINEAR ALGEBRA 2 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 4
MM111 INTRODUCTION TO MECHANICAL ENGINEERING 2 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 3
TDL101 TURKISH LANGUAGE I 2 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 2
YBD101 FOREIGN LANGUAGE-I 2 Hour(s) 0 Hour(s) 1 Fall Semester Compulsory 2
Total:
 30

2. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
AIT102 ATATURK’S PRINCIPLES AND HISTORY II 2 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 2
MM108 COMPUTER AIDED TECHNICAL DRAWING-II 2 Hour(s) 2 Hour(s) 1 Spring Semester Compulsory 4
MM110 INTRODUCTION TO ELECTRICAL AND ELECTRONICS 2 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 3
MM104 PHYSICS II 3 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 4
MM102 CALCULUS-II 3 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 5
MM106 PROGRAMMING 3 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 4
MM112 STATICS 3 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 4
TDL102 TURKISH LANGUAGE II 2 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 2
YBD102 FOREIGN LANGUAGE-II 2 Hour(s) 0 Hour(s) 1 Spring Semester Compulsory 2
Total:
 30

3. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM205 DIFFERENTIAL EQUATIONS 3 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 5
MM207 DYNAMICS-I 3 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 4
MMF203 OCCUPATIONAL HEALTH AND SAFETY-I 2 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 2
MM211 MATERIAL SCIENCE-I 3 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 4
Mİ201 TECHNICAL ENGLISH-I 2 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 2
MM203 STRENGTH OF MATERIALS-I 3 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 4
MM209 ENGINEERING MATHEMATICS 3 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 5
MM201 NUMERICAL METHODS 3 Hour(s) 0 Hour(s) 2 Fall Semester Compulsory 4
Total:
 30

4. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM208 DYNAMICS-II 3 Hour(s) 0 Hour(s) 2 Spring Semester Compulsory 5
MMF204 OCCUPATIONAL HEALTH AND SAFETY-II 2 Hour(s) 0 Hour(s) 2 Spring Semester Compulsory 2
MM212 MATERIAL SCIENCE-II 2 Hour(s) 1 Hour(s) 2 Spring Semester Compulsory 4
Mİ202 TECHNICAL ENGLISH-II 2 Hour(s) 0 Hour(s) 2 Spring Semester Compulsory 2
MM204 STRENGTH OF MATERIALS-II 3 Hour(s) 0 Hour(s) 2 Spring Semester Compulsory 4
MM202 PROBABILITY AND STATISTICS 2 Hour(s) 0 Hour(s) 2 Spring Semester Compulsory 5
MM210 MEASUREMENT TECHNIQUE 3 Hour(s) 0 Hour(s) 2 Spring Semester Compulsory 4
MM206 THERMODYNAMICS-I 3 Hour(s) 0 Hour(s) 2 Spring Semester Compulsory 5
Total:
 31

5. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM309 FLUID MECHANICS-I 3 Hour(s) 0 Hour(s) 3 Fall Semester Compulsory 4
MM307 HEAT TRANSFER 3 Hour(s) 0 Hour(s) 3 Fall Semester Compulsory 3
MM311 MANUFACTURING METHODS-I 2 Hour(s) 1 Hour(s) 3 Fall Semester Compulsory 3
MM305 MACHINE ELEMENTS-I 3 Hour(s) 0 Hour(s) 3 Fall Semester Compulsory 4
MM303 MECHANISMS 3 Hour(s) 0 Hour(s) 3 Fall Semester Compulsory 4
MM301 THERMODYNAMICS II 3 Hour(s) 0 Hour(s) 3 Fall Semester Compulsory 4
MMS301 Elective Courses 1 - Hour(s) - Hour(s) 3 Fall Semester Optional 4
MMS303 Elective Courses 2 - Hour(s) - Hour(s) 3 Fall Semester Optional 4
Total:
 30

6. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM310 FLUID MECHANICS-II 3 Hour(s) 0 Hour(s) 3 Spring Semester Compulsory 4
MM312 MANUFACTURING METHODS-II 2 Hour(s) 1 Hour(s) 3 Spring Semester Compulsory 3
MM304 DYNAMICS OF MACHINERY 3 Hour(s) 0 Hour(s) 3 Spring Semester Compulsory 4
MM306 MACHINE ELEMENTS-II 3 Hour(s) 0 Hour(s) 3 Spring Semester Compulsory 4
MM308 SYSTEM DYNAMICS AND CONTROL 3 Hour(s) 0 Hour(s) 3 Spring Semester Compulsory 3
MMS302 Elective Courses 3 - Hour(s) - Hour(s) 3 Spring Semester Optional 4
MMS304 Elective Courses 4 - Hour(s) - Hour(s) 3 Spring Semester Optional 4
MMS306 Elective Courses 5 - Hour(s) - Hour(s) 3 Spring Semester Optional 4
Total:
 30

7. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM405 MECHANICAL ENGINEERING LABORATORY-I 0 Hour(s) 2 Hour(s) 4 Fall Semester Compulsory 2
MM401 ENGINEERING PROJECT I 0 Hour(s) 3 Hour(s) 4 Fall Semester Compulsory 4
MM407 INTERNSHIP-I 0 Hour(s) 0 Hour(s) 4 Fall Semester Compulsory 2
MM403 DESIGN 3 Hour(s) 0 Hour(s) 4 Fall Semester Compulsory 2
MMS401 Elective Courses 6 - Hour(s) - Hour(s) 4 Fall Semester Optional 4
MMS403 Elective Courses 7 - Hour(s) - Hour(s) 4 Fall Semester Optional 4
MMS405 Elective Courses 8 - Hour(s) - Hour(s) 4 Fall Semester Optional 4
MMS407 Elective Courses 9 - Hour(s) - Hour(s) 4 Fall Semester Optional 4
MMSS401 Social Elective Courses 1 - Hour(s) - Hour(s) 4 Fall Semester Optional 4
Total:
 30

8. Semester Course Plan

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM404 GRADUATION PROJECT 0 Hour(s) 3 Hour(s) 4 Spring Semester Compulsory 2
MM406 MECHANICAL ENGINEERING LABORATORY-II 0 Hour(s) 2 Hour(s) 4 Spring Semester Compulsory 2
MM402 ENGINEERING PROJECT II 0 Hour(s) 3 Hour(s) 4 Spring Semester Compulsory 4
MM408 INTERNSHIP-II 0 Hour(s) 0 Hour(s) 4 Spring Semester Compulsory 2
MMS402 Elective Courses 10 - Hour(s) - Hour(s) 4 Spring Semester Optional 4
MMS404 Elective Courses 11 - Hour(s) - Hour(s) 4 Spring Semester Optional 4
MMS406 Elective Courses 12 - Hour(s) - Hour(s) 4 Spring Semester Optional 4
MMS408 Elective Courses 13 - Hour(s) - Hour(s) 4 Spring Semester Optional 4
MMSS402 Social Elective Courses 2 - Hour(s) - Hour(s) 4 Spring Semester Optional 4
Total:
 30

Elective Courses 1

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM319 CAST IRON 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4
MM315 RAW MATERIALS AND RAW MATERIALS PROCESSING 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4
MM327 MATERIAL CHARACTERIZATION-I 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4
MM313 TRIBOLOGY 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4

Elective Courses 2

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM323 THE HEAT TREATMENT OF STEELS 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4
MM321 COMPOSITE MATERIALS 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4
MM317 CORROSION 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4
MM325 MECHANICAL VIBRATIONS 2 Hour(s) 0 Hour(s) 3 Fall Semester Optional 4

Elective Courses 3

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM314 MATERIAL CHARACTERIZATION-II 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4
MM316 DESIGN AND MATERIAL SELECTION 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4

Elective Courses 4

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM322 ORE PREPARATION AND METALLURGICAL FRONT PROCESSES 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4
MM320 SPECIAL STEELS 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4
MM318 CERAMICS 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4

Elective Courses 5

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM326 NON-FERROUS METALS 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4
MM324 FRACTURE ANALYSIS 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4
MM328 VEHICLE MECHANICS 2 Hour(s) 0 Hour(s) 3 Spring Semester Optional 4

Elective Courses 6

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM409 NANO MATERIALS 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4
MM411 INTRODUCTION TO ROBOTICS 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4

Elective Courses 7

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM413 TECHNOLOGY AND MATERIALS OF RENEWABLE ENERGY 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4
MM415 SURFACE COATING METHODS 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4

Elective Courses 8

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM417 INDUSTRIAL FURNACES 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4
MM419 ENGINE DESIGN 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4

Elective Courses 9

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM421 WELDING METALLURGY 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4
MM423 METALLURGICAL TRANSACTIONS 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4

Social Elective Courses 1

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MMS401 ENTREPRENEURSHIP 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4
MMS403 PERSONAL DEVELOPMENT 2 Hour(s) 0 Hour(s) 4 Fall Semester Optional 4

Elective Courses 10

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM410 JOINING TECHNIQUES 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4
MM412 BIOMATERIALS 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4

Elective Courses 11

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM414 COMPUTER AIDED ANALYSIS OF MECHANICAL SYSTEMS 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4
MM416 REFRACTORY MATERIALS 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4

Elective Courses 12

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM418 QUALITY CONTROL 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4
MM420 MATERIAL HANDLING 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4

Elective Courses 13

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MM422 MODERN WELDING METHODS 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4
MM424 SUPERCONDUCTING MATERIALS 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4

Social Elective Courses 2

Course Code Course Title Theoretical Practice Year Semester of Study Type of Course ECTS
MMS402 ENGINEERING ECONOMICS 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4
MMS404 STRATEGIC MANAGEMENT 2 Hour(s) 0 Hour(s) 4 Spring Semester Optional 4

Examination Regulations, Assessment and Grading

Courses taken by a student have to be pre-approved by the student’s advisor every semester. At least 70% attendance for the theoretical classes and at least 80% attendance for the applied classes including workshop studies are obligatory to be able to attend the final exam. Students must attend at least one mid-term exam and a final exam for each course. 40% of the mid-term exam (homework, lab classes, quizzes, multiple choice tests) plus 60% of the final exam is accounted for evaluating the student’s performance in a course. Students should get at least 45 points out of 100 for each course. A student is considered successful for a course when he/she scores AA, BA, BB, CB or CC. A student can pass a class with DC or DD as well, but on a probational base that the general point average (GPA) of the student must be at least 2.0 at the end of his/her degree completion

Graduation Requirements

In order to successfully complete the undergraduate program of Mechanical Engineering, to pass all the courses available in the program (240 ECTS), to obtain at least 2.0 weighted grade point average over 4.00, 240 Production ü (30 days) and da Management-Organization mak (20 days) and they must complete the thesis successfully.

Mode of Study

Full Time

Facilities

Education activities in our department 1 professor, 2 Associate Professor Doctor, 1 Lecturer. Its members are conducted with 1 Doctor and 2 Research Assistants and the courses are conducted in modern classes with modern technology. Our students can benefit from all the facilities of the university free of charge during the day.

Programme Director or Equivalent

Nevşehir University, Faculty of Engineering and Architecture, Department of Machine Engineering., 50300 Nevşehir Türkiye Web: https://mm.nevsehir.edu.tr/ TEL: 0 384 228 10 00 FAX: 0 384 215 10 37 Department head: Assoc. Prof. Dr. Zahide Bayer ÖZTÜRK ECTS coordinator: Assoc. Prof. Dr. Zahide Bayer ÖZTÜRK